Niewiem czy było, ale może się przydać dla kogoś kto chce zmienić wałki rozrządu (Majlo
). Na stronie można także znaleśc sprężynki i talerzyki do naszych rexów, jakby ktoś chciał kręcić do 9000 :twisted: . Firma sprzedaje swoje produkty na amerykańskim Ebayu.
Wg mnie najfajniejszy setup z dostępnych:
Honda ZC DOHC Perf. Cams Stage 4
Acura / Honda 16v non-VTEC
1.6L DOHC D16A1, D16A2, D16A8, D16A9, D16Z5 & ZC
1989-1996 Integra / Civic (US)
1989-1996 Integra ZC (Japanese)
PART NUMBER: AC-H004 STAGE 4 Performance
Grind Number AC-H4
Advertised Duration Intake/Exhaust 280° / 280° (.004"/.008" gap)
Duration @ .050 V/L Intake/Exhaust 235° / 222°
Lobe Separation 105°
Cam Lift Intake-Exhaust (in/mm) .256"-.256" /6.50-6.50
Cam Analyser Graph Report: Check it Now !!
Cam Analyser Lift Report: Check it Now !!
Dynojet Power Report: Check it Now !!
Suggested Valve Springs: AC-H16
Cam Card Specs: View it Now!! (will pop-up on a new window)
Item Description
Very strong mid to upper RPM range. Use high compression pistons (10.5-11.5:1) and street strip cylinder head porting. Use low restriction intake/exhaust for max performance. Radical idle. It requires to modify ECU Program to make it idle. A piggy -back system or Stand Alone Engine Management System may be required for optimal performance. RPM range 2,000-8,000. We recomend our AC-H16 High Lift Valve Springs.
PRICE: $365.95
Honda "D" Series DOHC Valve Spring Set
This Single High Lift Valve Springs are made of Sweden Oteva Steel Material for Extreme Performance Applications. This Springs Fits Stock Valve Springs Retainers & Bottom Seat Shims on 16v DOHC Heads from 1989 to 1995. Set includes 16 springs.
PART NUMBER: AC-H16 Honda "D" Series DOHC Valve Spring Set
Manufacturer: CrespoCams
For Engine Codes: Honda/Integra ZC, D16A1, A8, A9 & Z5 Series DOHC
Can I Use Stock Retainer ?: YES
Can I Use Stock Bottom Shim?: YES
Max. Valve Lift: 13.50mm / .531"
Seat Pressure: 36 Kgs/79 Lbs (@ 37mm/1.457")
Open Pressure: 80 Kgs/176 Lbs (@ 22mm/.866")
Binds: @20mm/.787"
Outside Diameter: 21.96mm / .865"
Inside Diameter: 18.50mm / .728"
Wire Thick: 3.46mm / .136"
Wire Turns: 7
Wire Rotation: Left
Spring Colour: Dark grey with light blue stripe
MSRP: $ 130.40 + S&H
Item Description
This Valve Spring Set are ideal when switching from original cams to High Lift and duration cams than stock ones. Also when using a profile cam which has 1.5 to more mm of valve lift, where originals springs binds producing cam wear and risk of failure of the lobes.
The most important characteristic of them are the wire separation between each turn, and their width. This makes itmore stronger than original ones. This valve springs will welp the follower to copy the lobe profile more precisely. They have an average of +5 kg more of pressure than original springs.
We also recomend using High Lift Valve Springs when engine exceeds 7000 rpm's.
Suggested Redline > 9000 rpm's.
Suggested Springs for use with our Stage 4 and 5 ZC Performance Cams.
PRICE: $115.95
